Customers who purchased this item were also interested in:

4562 FET 10103
4562 FET
Deans Micro Plug Set 10104
Deans Micro Plug Set

XMOD Gen1 Tight Turns Steering Mod

AtomicMods Product ID: 10100
This modification includes the surface mount resistors required to increase the turning ratio on the Generation 1 XMODs to go full lock to lock.

Take a look under "More Pictures" to see comparison photos.

You can also see the servo go lock to lock in the video below.

<bgsound src="http://video.atomicmods.com/tight_turns.wmv" loop="1">

  • Features:Drives steering servo full lock to lock
  • Includes:3 Chip Resistors, (only 2 are required but we include an extra in case you lose one, and you will)
  • Application Notes:The installation is pretty simple, but does require decent soldering skills and a good quality iron.
  • Tutorial Link: Tight Turns Installation
  • Team AtomicMods Comments:This is a simple mod that greatly increases the steering response. You will be turning the steering sensitivity down I promise. - Rob
  • For Use With:XMOD Generation 1
  • Weight:Bag of 3 - .48g
  • Launch Date:10/30/2005
  • Shipping:Normally ships within 1 day
Your Price $6.99
Qty

Customer Reviews

Average Rating

I would recomend these to anyone, they are truly awesome!!! I can turn my car in less than half the didstance it took before.

These are wicked they make the turning radius match that of the evo...meaning i can turn my car in half the radius...this is a must for anyone..mind you they are small so take your time and get the right tools to do the job...i did this install with no sodlering experince at all, so you can to..don't wait you need this now!!!

A tip for putting these things in: use a broken off toothpick with a bit of earwax on the end to stick to the resistor, then lower it to your board and solder. MUCH easier than chasing it all around the board with a hot iron.
View All 9 Reviews
Write A Review