Customers who purchased this item were also interested in:

XMOD Evo FET Upgrade Set

AtomicMods Product ID: 10578
The Evo requires 2 different types of FETs and this set includes one of each. Even with a single layer these are much stronger than the factory FETs, but stack them 2 or 3 high for a very efficient and powerful car.
  • Includes:
    • 1) IRF7324 FET P-Channel
    • 1) IRF9910 FET N-Channel
  • Application Notes:You prep the FETs the same as shown in the XMOD Generation 1 Stacked FET Tutorial. The only difference is that you must pay attention to which FET goes where since there are two different types. The 9910 goes on the front and the 7324 goes on the back. Also, the orientation dots (pin 1) go to the inside of the car. You will find an illustrated photo under "More Pictures" Additonally, you do not solder the 4 output side(outside of car) pins together. The are soldered in pairs. Just take a good look at the factory ones before you pull them off.
  • Team AtomicMods Comments:While it is true that the Evo has tougher stock FETs than the Gen1, they benefit greatly from this upgrade which provides more current to the motor. - Rob
  • Downloadable Documents:
    FET_Data_Sheet_IRF7324.pdf
    FET_Data_Sheet_IRF9910.pdf
  • For Use With:XMOD Evo Cars and Trucks
  • Specifications:Drain Source Voltage- 20Amps
    Drain Source Current - 7.1-12A
  • Launch Date:10/30/2005
  • Shipping:Normally ships within 1 day
Your Price $7.99
Qty

Volume Discounts

QtyPrice
10$6.99

Customer Reviews

Average Rating

Hi!! to all This information from atomicMods. is the best and i was able to understand more about my new evo, and to be able to do it my self. thanks,

This is a sweet upgrade. I installed 2 sets of these a stock Atomic Mods motor, and some of their NiMH batteries and my F150 disappeared...

i bought a set of these to replace my blown stock ones and i instantly noticed smoother throttle response and a slight increase of speed.