XMOD EVO HD Lithium Polymer Pro 2S2P 10C Pack

AtomicMods Product ID: 10399
Double your top speed and shave 7 grams of ugly factory battery fat with this High Discharge 10C Poly Pro Pack for the XMOD Evolution. This pack sits in place of the Stock Battery Tray and mounts perfectly flush with the bottom of the car. This is a 2S2P pack (2 cells in series and 2 cells in parallel).

This is the new 10C version that is capable of 10 amps of continous current.

  • Features:
    • 4 Cells Provide More Current
    • Li-Poly Provides Flat Discharge Rate
    • Li-Poly Never Needs Discharging
    • Higher Voltage Improves Performance
    • Ultra Light Weight Improves Handling
    • SuperFlex 18 Wire Improves Current Flow
    • Pro Plug Makes Charging Safe and  Easy
    • Super Stick Tape Securely Holds Pack
    • All Wiring Engineered for a Super Clean Fit
         
  • Includes:Battery pack with four 500 mAh 7.4v Lithium Polymer cells wired in a 2S2P configuration with internal PC wiring boards installed and soldered for wiring integrity. Battery harness is made with SuperFlex 18 wire with Micro Plug pre-soldered. Batteries are covered in heat shrink for protection. Super Stick tape is applied for securing the cells to the car. The MainBoard harness is also made with SuperFlex 18 wire with Micro Plug pre-soldered and the free ends are pre-tinned to ease installation.
  • Requires:Lithium Polymer Charger
  • Application Notes:This is a simple installation and anyone with rudimentary soldering skills should be able to handle it.

    The average current draw on an XMOD with stacked FETs and a hot motor is around 1 amp, which will yield a 60 minute run time with this pack. Running longer generates more heat and is especially hard on motors so keep an eye on the motor temperature when running beyond 15 minutes to prevent toastification. The GPM XMOD Evo Car Billet Aluminum Rear Driveline Case will help considerably with heat dissipation. Also, a bind free car will run much cooler, so running ceramic bearings will make a dramatic difference, but open bearings are the next best thing.

    WARNING!  Improper usage and charging of Lithium Polymer batteries can result in explosion and or fire. See the Lithium Polymer Batteries Q&A Section for important safety information.

  • Tutorial Link:XMOD EVO Poly Pro Installation Tutorial
  • Team AtomicMods Comments:Running Lithium has many advantages; light weight, flat discharge rate, no need to discharge and overall smokin performance. Using the Tamiya Speed Checker we tested a stock XMOD EVO with Radio Shack Ni-Mh cells and the 12-13 gear combination and got 15.5 MPH, with the same setup and the Poly Pro Pack we got 26 MPH! There is no other upgrade that will improve your performance as much as Lithium Power. - Rob
  • For Use With:XMOD Evolution Car and Truck
  • Weight:
    • Current - 1000 mAh
    • Max Voltage - 8.4v
    • Nominal Voltage - 7.4v
    • Minimum Safe Voltage - 6v
    • Pack Config. 2S2P
    • "C" Rating - 10C
    • Internal Cell Resistance - <80 mΩ
    • Weight - 56.51g (Factory - 63g)
  • Have Questions?See the Battery Q&A
  • Launch Date:10/30/2005
  • Shipping:These packs are now built-to-order and should be shipped within 3-5 business days.
Your Price $54.99
Qty

Customer Reviews

Average Rating

This pack is amazing, i have been running it hard for three months now and it still works perfectly and my car runs for an hour without recharging. Thansk AtomicMods!

THIS WAS MY FIRST UPGRADE FROM ATOMICMODS.COM...THIS IS THE GREATEST!CHECKED THE SPEED ON MY XMOD '05 STANG AND IT WAS 38 MPH ON A TENNIS COURT!

This stuff is amazing! if you still have that old battery tray on your evo and want something a lot faster this is just the thing for you.
View All 27 Reviews
Write A Review