Customers who purchased this item were also interested in:

XMOD Evo FET Upgrade Set 10578
XMOD Evo FET Upgrade Set
Deans Micro Plug Set 10104
Deans Micro Plug Set

XMOD EVO HD Lithium Polymer Pro 2S 10C Pack

AtomicMods Product ID: 10398
Double your top speed and shave a whopping 31 grams of ugly factory battery fat with this High Discharge 10C Poly Pro Pack for the XMOD Evolution. This low profile pack fits with room to spare. This "2S" version has 2 cells in series yielding 450mAh.

This pack has a 10C rating that is capable of an impressive 4.5 amps of continous current.
  • Features:
    • 2 Cells Allow a Low Profile Pack
    • High Discharge Cells Deliver Massive Punch
    • Li-Poly Provides Flat Discharge Rate
    • Li-Poly Never Needs Discharging
    • Higher Voltage Improves Performance
    • Ultra Light Weight Improves Handling
    • SuperFlex 18 Wire Improves Current Flow
    • Pro Plug Makes Charging Safe and  Easy
    • Super Stick Tape Securely Holds Pack
    • All Wiring Engineered for a Super Clean Fit
         
  • Includes:Battery pack with two 460 mAh 7.4v Lithium Polymer cells wired in a 2S configuration with internal PC wiring boards installed and soldered for wiring integrity. Battery harness is made with SuperFlex 18 wire with Pro Plug pre-soldered. Batteries are covered in heat shrink for protection. Super Stick tape is applied for securing the cells to the car. The MainBoard harness is also made with SuperFlex 18 wire with Pro Plug pre-soldered and the free ends are pre-tinned to ease installation.
  • Requires:Lithium Polymer Charger
  • Application Notes:This is a simple installation and anyone with rudimentary soldering skills should be able to handle it.

    The average current draw on an XMOD with stacked FETs and a hot motor is around 1 amp, which will yield a 27 minute run time with this pack. Running longer generates more heat and is especially hard on motors so keep an eye on the motor temperature when running beyond 15 minutes to prevent toastification. The GPM XMOD Evo Car Billet Aluminum Rear Driveline Case will help considerably with heat dissipation. Also, a bind free car will run much cooler, so running ceramic bearings will make a dramatic difference, but open bearings are the next best thing.

    WARNING!  Improper usage and charging of Lithium Polymer batteries can result in explosion and or fire. See the Lithium Polymer Batteries Q&A Section for important safety information.

  • Tutorial Link:XMOD EVO Poly Pro Installation Tutorial
  • Team AtomicMods Comments:Running Lithium has many advantages; light weight, flat discharge rate, no need to discharge. Using the Tamiya Speed Checker we tested a stock XMOD EVO with Radio Shack Ni-Mh cells and the 12-13 gear combination and got 15.5 MPH, with the same setup and the Poly Pro Pack we got 30.4 MPH! There is no other upgrade that will improve your performance as much as Lithium Power. - Rob
  • For Use With:XMOD Evolution Car and Truck
  • Specifications:
    • Current - 450 mAh
    • Max Voltage - 8.4v
    • Nominal Voltage - 7.4v
    • Minimum Safe Voltage - 6v
    • Pack Config. 2S
    • "C" Rating - 10C
    • Internal Cell Resistance - <80 mΩ
    • Weight - 31.88g (Factory - 63g)
  • Launch Date:11/26/2006
  • Shipping:Normally ship within 1 business day.
Your Price $34.95
Qty

Customer Reviews

Average Rating

Lithium's cool... but whatever happened to the 2S2P pack? Still, if this is really the best out there... GO FOR IT ALREADY!! I put lithium in every car I get before I even drive it. Yes, it's that good.

Easy to install, went ahead and hard-wired my motor while I had the board off. absolutely screams. First run with the new batteries burned 1/2 of the tread off of a set of soft tires. More torque, more top speed, well worth it!

The first time I used it I popped a wheelie. I guess that means it has MAD POWER!!!!!!!!!!!!! :)
View All 20 Reviews
Write A Review