Customers who purchased this item were also interested in:

Atomic T2 High Current Motor

AtomicMods Product ID: 11086
The Atomic T2 is a motor designed to have more torque than the Z2, it has a standard style rotor that creates monster bottom end and in combination with lithium sees higher top speeds than the Z2.

Wondering how this motor stacks up against the others?  Check out the Motor Power Comparison.

Be sure to check out our article on Interpreting a Motor's Power.
  • Features:
    • Trued armature runs smoother and faster
    • Fat commutator provides durability
    • Light weight armature for faster wind up
    • Open motor can for better cooling
    • Pre-drilled screw holes support aftermarket motor mounts
    • Open End-bell, gives easy access to commutator and brushes
    • Positive brush is Silver, negative is Carbon for maximum power.
    • NEO-Magnets are strong and have a high resistance to demagnetization.
  • Requires:Minimum is 2X2 Stacked FETs but 2x3 is Recommended, V2 is even better.
  • Application Notes:As with all high current motors this one can be burned up if you let it get too hot. If you run Lithium, you must be even more careful. The use of Com Drops lubricates the brushes reducing friction and heat which greatly extends motor life. A Pit Fan is another valuable tool that no serious racer should be without as you can cool the motor much faster and get more track time. You will need to use a file to roughen up the brush tabs (where the wires solder to the motor) in order to get a good connection to the motor and keep the wires from popping off. The brushes and tabs were produced so perfectly that solder doesn't wnat to stick to a surface that smooth.
  • Team AtomicMods Comments:This may be the fastest motor I have ever seen. I spent some time at the track with it and was able to run the Lithium pack dead and the motor didn't get nearly as hot as other high current motors I have used. I suppose it is the wide open case design that makes it run so cool. I ran the Motor in a decked out Mini-Z and it was really too fast, we ended up dialing back the Helios radio to 42% throttle to make it managable, LOL. This is a truly amazing motor.

    There is an intersting difference in power curves between the T2 and Z2 motors. Compare the difference in RPM between the T2 and Z2 at the three different test voltages. At the lower 4.8v the Z2 is faster, but at higher voltages the T2 is slightly faster. My reccommendation is this; if you are going Lithium go with the T2, but otherwise, stick with the Z2. - Rob

  • For Use With:Mini-Z MR-01, MR-02, MR-015, MA-010, F-1, Monster & Overland, XMOD Evo Cars & Trucks
  • Specifications:
    • RPM @ 4.8V = 34,734 (1.5 Amp Draw)
    • RPM @ 6V = 43,600 (1.8Amp Draw)
    • RPM @ 8.4V = 59,240 (2.6 Amp Draw)
  • Weight:19.22g
  • Have Questions?See the Motor Q&A
  • Launch Date:3/3/2006
  • Shipping:Normally ships within 1 day
Your Price $39.99
Qty

Customer Reviews

Average Rating

This motor is insanely fast! pair it up with lithium and you get bent wheels and torqued tie-rods! This motor is 100% BAD@$$!If you get another motor, then you're insane!!!!

This motor ROCKS!!!!! The service is unmatched and selections are unending. I hooked up the T2 in my custom xmod and completely blows away the competion. All my friends are scrambling to find out what I've got in this thing. Hats off to you guys at Atomicmods!!! You guys rule!!!!!!

This is definatley the best motor at atomicmods.My cars and truck spin out,flip over,bend rims,torque tie-rods,etc.