Customers who purchased this item were also interested in:

4562 FET 10103
4562 FET
XMOD Evo FET Upgrade Set 10578
XMOD Evo FET Upgrade Set

Atomic AD Motor

AtomicMods Product ID: 11095
This motor is designed specially for the Mini-Z AD Board. You can run it on any car, but make sure you have at least a 2x2 stack of FETs. Comes with ball bearings, standard magnets and carbon brushes. The specially designed case allows you to change brushes and clean the commutator without opening the motor can and the large vents allow it to run much cooler.

Wondering how this motor stacks up against the others?  Check out the Motor Power Comparison.

Be sure to check out our article on Interpreting a Motor's Power.
  • Features:
    • Balanced for Mini-Z AD Board
    • Good battery consumption/performance ratio
    • Lightweight commutator for fast acceleration
    • Ball bearings for smooth running & long life
    • Pre-drilled for aftermarket motor mounts
    • Open endbell, gives easy access to commutator and brushes
  • Requires:AD Board or 2x2 Stacked FETs
  • Application Notes:You will need to use a file to roughen up the brush tabs (where the wires solder to the motor) in order to get a good connection to the motor and keep the wires from popping off. The brushes and tabs were produced so perfectly that solder doesn't wnat to stick to a surface that smooth.
  • Team AtomicMods Comments:You may be wondering, "What the heck is an AD board?" Well I'll tell you, it is a special high end board for Mini-Z cars and trucks. It has twice as many FETs as the stock boards so it can handle high current motors out of the box, it also has a digital servo, uses FM instead of AM. It does require an upgraded radio like the EX-10 and will set you back a few hundred bucks to get everything you need to run it. The icing on the cake is that it is computer programmable via USB. I have been expiermenting with them (I love my job) and may carry them in the store if there is enough interest. - Rob
  • For Use With:Mini-Z MR-01, MR-02, MR-015, MA-010, F-1, Monster & Overland, XMOD Evo Cars & Trucks
  • Specifications:
    • RPM @ 6V = 42,268 (1.4 Amp Draw)
    • RPM @ 8.4V = 57,850 (2.2 Amp Draw)
  • Weight:18.75g
  • Have Questions?See the Motor Q&A
  • Launch Date:3/3/2006
  • Shipping:Normally ships within 1 day
Your Price $29.99
Qty

Customer Reviews

Average Rating

This motor is insane! When i turn with it floored my soft tires fly off!

OMG YES BUT IT!I GOT ONE AS A GIFT AND EVEN WITH STOCK FET's ITS A BEAST! ITS SO FAST I CANT PUT INTO WORDS. first time on pavement ... i wrecked brand new tires

This motor is very fast.I can't even explane the rpm's
View All 6 Reviews
Write A Review