Customers who purchased this item were also interested in:

4562 FET 10103
4562 FET
Deans Micro Plug Set 10104
Deans Micro Plug Set

8962 FET

AtomicMods Product ID: 13074
Item is out of stock.
These are upgrade FETs that we stack on Mini-Zs and XMOD Gen1s to allow a greater current draw from the batteries to the motor. The stock FETs, allow just over 2 amps of usable current. These FETs allow 7 amps!
  • Includes:1) 8962 FET
  • Application Notes:Although the tutorial is very detailed, this modification should be reserved for those possessing moderate-to-advanced soldering skills. Also, this item is sold under the "You fry, you buy" policy...meaning if you fry the FETs, you buy new ones. We have installed several hundred FETs on our bench and have yet to receive a DOA.

    Even with a 2x1 your Mini-Z will perform better, as these FETs are considerably better than the 3010 FETs found on newer Mini-Zs and are far superior to the 3004 FETs found on older ones. Most high current motors will be fine with a 2x2 stack, but some power hungry beasts are better with a 2x3. Mini-Z Monster Trucks and AWD cars require more current and benefit the most from 2x3. The higher you stack the FETs, the lower the "On Resistance" of your stack is and the more efficient it becomes at passing current, however the throttle becomes unstable at 2x4 so 2x3 is the max height for Mini-Zs of any kind. The max height on a Mini-Z F1 is 2x2, which requires trimming the rear shock brace as shown under Team Tips.

  • Tutorial Link:XMODS Stacked FET Installation
    Mini-Z Stacked FET Installation
  • Team AtomicMods Comments:These FETs are a less expensive option to the more popular 4562s. Although they are cheaper, we haven't found any significance difference in quality between the two. Bottom line, if you are looking for the name brand in FETs, then go with the 4562. But in our testing the 8962 perform just as well. - Rob
  • For Use With:XMOD Gen1, Mini-Z MR-01, MR-02, MR-015, MR-010, Monster & Overland
  • Weight:.08 grams
  • Launch Date:12/7/2006
  • Shipping:Normally ships within 1 day
Your Price $1.99

Customer Reviews

Average Rating

i bought 8 of these and they are the best for the price. if you are low on money but have a need for speed these are for you!

These seem to work just as good as the 4562 FETs I stacked on my other car. I'm all about saving the dough too, so woohoo!

I have stacked these FETS in at least 4 cars now and they scream down the track! The tutorial was easy to follow and I can now place these on my stock Xmod EPs in the matter of 15 minutes or less. They make my cars perform like they should , a must have for any DIY Xmodder!
View All 3 Reviews
Write A Review