4562 FET

AtomicMods Product ID: 10103
These are the FETs that we stack on Mini-Zs and XMOD Gen1s to allow a greater current draw from the batteries to the motor. The stock FETs, allow just over 2 amps of usable current. These 4562 FETs allow about 7 amps of usable current! So when they are stacked 2x2, your FETs will be capable of passing 14 amps of current.

Looking for a cheaper alternative? Check out the 8962 FETs which perform just as well, but for half the price.
  • Includes:1) 4562 FET
  • Application Notes:Although the tutorial is very detailed, this modification should be reserved for those possessing moderate-to-advanced soldering skills. Also, this item is sold under the "You fry, you buy" policy...meaning if you fry the FETs, you buy new ones. We have installed several hundred FETs on our bench and have yet to receive a DOA.

    Even with a 2x1 your Mini-Z will perform better, as these FETs are considerably better than the 3010 FETs found on newer Mini-Zs and are far superior to the 3004 FTEs found on older ones. Most high current motors will be fine with a 2x2 stack, but some power hungry beasts are better with a 2x3. Mini-Z Monster Trucks and AWD cars require more current and benefit the most from 2x3. The higher you stack the FETs, the lower the "On Resistance" of your stack is and the more efficient it becomes at passing current, however the throttle becomes unstable at 2x4 so 2x3 is the max height for Mini-Zs of any kind. The max height on a Mini-Z F1 is 2x2, which requires trimming the rear shock brace as shown under Team Tips.

  • Tutorial Link:XMODS Stacked FET Installation
    Mini-Z Stacked FET Installation
  • For Use With:XMOD Gen1, Mini-Z MR-01, MR-02, MR-015, MR-010, Monster & Overland
  • Weight:.08 grams
  • Launch Date:10/30/2005
  • Shipping:Normally ships within 1 day
Your Price $3.99
Qty

Customer Reviews

Average Rating

This is a great upgrade. Its quite a bit faster, and your Tutorial is very easy to follow.

Are you kidding? Unless you want to toast your precious these are REQUIRED for aftermarket engines.

I love your tutorial, it was easy as pie to follow! you guys are amazing!
View All 4 Reviews
Write A Review