| Body |
Shaft |
Spacer |
Position |
Evo Body Clip |
Series |
| Scion TC |
Medium |
No |
Back |
Included |
Evo |
| 06 Mustang |
Long |
Yes |
Forward |
Included |
Evo |
| Infiniti G35 |
Long |
Yes |
Forward |
Included |
Evo |
| Lancer |
Medium |
No |
Back |
Included |
Evo |
| 67 Firebird |
Medium |
No |
Back |
Included |
Evo |
| Subaru WRX |
Medium |
No |
Back |
Must Purchase |
Gen 1 |
| Nissan 350Z |
Medium |
No |
Back |
Must Purchase |
Gen 1 |
| 65 Mustang |
Medium |
No |
Back |
Must Purchase |
Gen 1 |
| 67 Camaro |
Medium |
No |
Back |
Must Purchase |
Gen 1 |
| Honda Civic |
Medium |
No |
Back |
Must Purchase |
Gen 1 |
| Skyline |
Medium |
No |
Back |
Must Purchase |
Gen 1 |
| Corvette |
Medium |
No |
Back |
Must Purchase |
Gen 1 |
| Supra |
Medium |
No |
Back |
Must Purchase |
Gen 1 |
| '04 Mustang |
Short |
No |
Forward |
Must Purchase |
Gen 1 |
| Acura NSX |
Short |
No |
Forward |
Must Purchase |
Gen 1 |
| Acura RSX |
Short |
No |
Forward |
Must Purchase |
Gen 1 |
Chart Legend
Body - Description
Shaft - The Proper length Evo shaft for the selected body
Spacer - Whether or not the spacer is required
Position - Which Driveline Case mounting holes to use
Evo Body Clip - The Evo uses a different body clip that is included with the newer Evo Series bodies. You may purchase Gen 1 bodies for your Evo but you will need to buy the body clip seperately. A
Stock version and a
Billet Aluminum version are available.
Series - For information only. This shows whether the body was originally designed for the Gen 1 or for the Evo.
How do I adjust the chassis length on my Evo?
Take a look at the photos below for a visual explanation.
Short Setting
You remove the chassis spacer and mount the driveline case in the forward holes. A short shaft is used here.
Medium Setting
You remove the chassis spacer and mount the driveline case in the back holes. This will use the medium shaft.
Long Setting
You have the spacer in and the driveline case mounted in the forward holes. You will need the long shaft for this one.
Extra Long Setting
You have the spacer in and the driveline case mounted in the back holes. This is not used for any of the XMOD bodies, but could be useful for a custom application. Note: We do not have any driveshafts for this length, so you will not be able to run your car in AWD mode if you choose this option.